Shandong Xinkaite Bearing Co.,Ltd.
Unified Social Credit Code: 9137 1525MA3C 5428XP
Production Department
Address: Xu Village Industrial Garden, Gan Town, Guan County, Shandong
Tel: +86 635 5638235
Fax: +86 635 5638808
Mobile: +86 15563545668
Service Hotline: 4000 305204
Sales Department
Address: 314 Puli Mansion, Beixiaoxinzhuang West Street, Jinan City, Shandong
Tel: +86 15562637177
Fax: +86 531 87901699
WhatsApp: +86 15688862750
Skype: live:XinKaite
Email: xkte@xinkaite.com
Introduction to the installation of self-aligning ball bearing
Clicks:14478 Date:12-2
Self-aligning ball bearing installation method: press fit: the bearing inner ring and shaft which is tightly matched with the outer ring and bearing seat hole is a loose fit, can press the bearing pressure mounted on the shaft, and the shaft together with the bearing load in the bearing hole, press the bearing inner ring end face assembly a soft pad sleeve made of metal material (copper or steel), the bearing outer ring and bearing seat hole is tightly matched with the inner ring and shaft is a loose fit, the bearing can be pressed into the bearing hole, then the assembly sleeve diameter should be slightly smaller than the diameter of the hole. If the bearing ring with the shaft and hole is a tight fit, installation of interior ring and the outer ring and pressed into the shaft and hole structure, the assembly sleeve should be able to face tight and bearing inner ring and outer ring.
Self-aligning ball bearing two installation methods: heating by heating with bearing or bearing seat, the expansion will close fit into the installation method of loose fitting using heat. Is a commonly used method for installation and labor-saving. This method is suitable for a large amount of surplus bearing installation, hot charging before the bearing or separable bearing rings into the tank uniform heating of 80-100 DEG C, then removed from the oil as soon as possible fitted to the shaft, to prevent cooling after the end face of the inner ring and shaft shoulder joint is not tight, the bearing cooling can be axial fastening. Bearing tight fit bearing outer ring and light metal by heating, bearing the hot charging method, can avoid mating surface by abrasion. With oil tank heating bearings, from the bottom at a certain distance should be a mesh, or with a hook hanging bearing, bearing can not be put on the bottom, to prevent the heavy impurities into the bearing or uneven heating, the tank must be strictly control the temperature thermometer, shall not exceed 100 degrees, to prevent the occurrence of the tempering effect, make the ring hardness decreased.
China Shandong Xinkaite Bearing Co.,Ltd.Conveyor Roller Set professional manufacturers, long-term supply of Conveyor Roller Set, provide the latest Conveyor Roller Set price for roller bearings, roller parts industry concentrated areas, we have long-term fixed partners, its Conveyor Roller Set products further around the world. Sales hotline: 086+ 0635-5638235
